D63.20-1410-06
1 Apply white sealing adhesive as shown (figure A).
2 Position connecting panel (1) and set rivets (2).
3 Create riveted joint between connecting panel (1) and cab below floor panel.
4 Remove visible residues of white sealing adhesive.
D63.20-1411-09
5 Apply white sealing adhesive as shown (figure B).
6 Position corner pillar (3) and set rivets (4).
7 If necessary, set rivets (5) or all prepared rivets for partition wall
8 Press connecting panel (1) to corner pillar (3)and fix in place.
9 Remove visible residues of white sealing adhesive.
10 Mask corner pillar (3), connecting panel (1), separating point as well as cab and caulk with broom yellow sealing adhesive.
11 Bond connecting panel (1) to floor panel at bottom of floor panel with white sealing adhesive.
12 Seal all rivets in exterior area with broom yellow sealing adhesive.
13 Remove visible residues of white or broom yellow sealing adhesive and masking tape.