D63.10-1657-06
1 Detach an approx. 50 mm wide strips of protective foil from edges of side wall (1).
2 Make markings (2) for insertion depth at top, bottom and right side wall (1).
Dimension:
a = 25 mm
3 Remove remaining residues from adjacent frame profiles.
Max. 0.2 mm of the old adhesive material may remain.
4 Slide side wall (1) as far as possible toward markings (2) into adjacent frame profiles with aid of helper.
5 Position rear profile rail (7), align and drill rivet holes on inside of into side wall (1).
Helper required to hold side wall (1).
Adjust drilling depth to 10 mm.
6 Remove rear profile rail (7) and side wall (1) with aid of helper and lay down on suitable subbase.
7 Clean bonding area on front profile rail (3), rear profile rail (7) as well as adjacent frame profile and apply primer.
8 Clean side wall (1) in bonding area and apply primer.
D63.10-1663-05
9 Apply white sealing adhesive (6) to rear profile rail (7).
10 Slide rear profile rail (7) to side wall (1), align and set rivets (8).
11 Remove visible residues of white sealing adhesive (6).
D63.10-1658-12
12 Apply white sealing adhesive (6) to adjacent frame profiles (4, 5).