Commercially available tools
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-02A | Spot welder |
WE58.40-Z-1003-02A | Multifunction device |
D63.10-0036-11
1 Weld right side wall paneling bottom section (1) to sheet metal strips ( , arrows).
D63.10-0037-11
2 Weld right side wall paneling bottom section (1) to
side wall paneling top section (19), outer corner pillar paneling (5) and front paneling (14) ( , arrows).
D63.10-0038-11
To prevent the sheet metal parts from distorting, hold steel or copper block to side wall paneling from outside. The block (approx. 25 mm x 25 mm x 200 mm) should make full contact.
3 Weld right side wall paneling bottom section (1) to inner side wall section (10) ( or , arrows).
D63.10-1180-01
4 Weld right side wall paneling (1) to front inner side wall section
( , arrows).
D63.10-1181-01
5 Weld right side wall paneling (1) on rear inner side wall section ( , arrows).