ar6130d100201te

Remove/install underbody trim at right on high-voltage battery carrier

유형 ar · 주제 61.30 · 버전 0101 · 2019-12-09

적용 대상: Model 910 with engine 780.703

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 61 언더바디 › 61.30 분사수　보호 — 시리즈 910

EinPAS 35 바디/프레임/부착 부품 › 35.25 절연/하단 패널/실링/언더바디 보호 › 35.25.41 언더바디 패널/방음 장치/언더바디 보호 — 시리즈 910

엔진/변속기에도 적용: 780 703

AR61.30-D-1002-01TE

Remove/install underbody trim at right on high-voltage battery carrier

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Model

910 with engine 780.703

Remove/install underbody trim at right on high-voltage battery carrier

D61.30-A004-79

Underfloor paneling (2) must already be released for this purpose.

1

Remove bolt (3) .

2

Remove expansion rivets (4).

Installation: Check expansion rivets (4) for damage.

In the case of a corresponding finding,

replace damaged expansion rivets (4).

3

Remove underfloor paneling (1).

To do so, remove nuts (5).

4

Install in the reverse order.

참조 문서