201 589 00 51 00
Spot weld miller
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D61.10-0026-06
1 Cut spot welds out of floor panel (2) and inner corner pillar paneling (6) (arrows).
D61.10-0027-10
The following steps apply for the right side of the vehicle and must be performed on the left side with locations reversed.
2 Cut 8 spot welds out of end cross member (1) behind longitudinal member (arrows).
D61.10-0028-10
3 Separate end cross member (1) around longitudinal member mount (dotted line).
D61.10-0029-10
4 Separate end cross member (1) along outer longitudinal member (9) (dotted line).