D61.10-1367-06
1 Drill out rivet (1).
2 Unscrew bolts (2), remove connecting panels (3) and separate reinforcement profiles (4) from wheel well (7)
3 Separate connection stay (5) at front of firewall (6)
D61.10-1368-09
4 Cut wheel well (7) along dotted lines (9, 10) and remove
5 Cut remaining piece (11) on wheel well (7) along dotted line (12) from floor panel (8) and remaining piece (13) of side wall (6).
6 Separate remaining piece (14) from floor plate (8).
7 Remove remaining adhesive material from side wall (6) and floor plate (8).
Do not leave more than 0.2 mm of old adhesive.
8 Unscrew bolts (16), separate sealing joint on plate (15) and remove plate (15)