ar6110d0008b

Remove/install bracket for ABS unit

유형 ar · 주제 61.10 · 버전 0114 · 2019-05-20

적용 대상: Model 690.6 with code BB0 (Antilock brake system (ABS)) Model 901.0##/3##/4## ## as of 718188, 901.6, 902.0##/3##/4## ## as of 718188, 902.6, 903.0##/3##/4## ## as of 718188, 903.6, 904.0##/3##/4## ## as of 718188, 904.6, 905.6 with code BB0 (Antilock brake system (ABS))

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 61 언더바디 › 61.10 프레임　플로 — 시리즈 690 (모델 6**) · 시리즈 901 (모델 0**, 3**, 4**, 6**) · 시리즈 902 (모델 0**, 3**, 4**, 6**) · 시리즈 903 (모델 0**, 3**, 4**, 6**) · 시리즈 904 (모델 0**, 3**, 4**, 6**) · 시리즈 905 (모델 6**)

EinPAS 35 바디/프레임/부착 부품 › 35.32 언더바디 › 35.32.35 플로어 그룹/하부구조 프레임 — 시리즈 690 (모델 6**) · 시리즈 901 (모델 0**, 3**, 4**, 6**) · 시리즈 902 (모델 0**, 3**, 4**, 6**) · 시리즈 903 (모델 0**, 3**, 4**, 6**) · 시리즈 904 (모델 0**, 3**, 4**, 6**) · 시리즈 905 (모델 6**)

AR61.10-D-0008B

Remove/install bracket for ABS unit

14.05.2019

Model

690.6

with code BB0 (Antilock brake system (ABS))

Model

901.0##/3##/4## ## as of 718188, 901.6, 902.0##/3##/4## ## as of 718188, 902.6, 903.0##/3##/4## ## as of 718188, 903.6, 904.0##/3##/4## ## as of 718188, 904.6, 905.6

with code BB0 (Antilock brake system (ABS))

Remove/install bracket for ABS unit

1

Bracket

A

Range

D61.10-0149-06

Remove

Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01D

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Topical note

General information on body repair

AH60.00-N-0001-01A

1

Remove hydraulic unit


Model 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4

AR42.30-D-8601B

Model 901.6, 902.6, 903.6, 904.6, 905.6, 690.6

AR42.30-D-8601C

2

Remove detachable parts in repair area

3

Cover all detachable parts that remain in the repair area

4

Expose and grind down weld seams in the area A

5

Remove bracket (1)

Zinc dust paint suitable for spot welding

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A

Install

6

Grind off both sides of the bracket (1) in the marked areas and coat it with zinc dust paint

Zinc dust paint suitable for spot welding

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A

7

Position mount (1) according to dimensions specified in drawing and align

Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

8

Weld the bracket (1) to the body ( )

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A

General notes on welding

AH60.00-N-0005-01A

9

Vacuum out hollow cavities


Metal shavings and metal grinding dust in hollow cavities
can lead to corrosion damage.

10

Clean areas repaired and priming with MB primer filler

11

Supplement standard underfloor protection with MB permanent underbody sealant

12

Paint repair area adjacent surfaces

13

Install hydraulic unit


Model 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4

AR42.30-D-8601B

Model 901.6, 902.6, 903.6, 904.6, 905.6, 690.6

AR42.30-D-8601C

14

Reinstall all detachable parts removed

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

참조 문서