Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
D61.10-0109-06
1 Mark separation line (4) at a distance of a=20 mm from edge (arrow).
2 Cut section (2) off along separation line (4).
3 Cut shaded area (5) off to width of b=15 mm.
D61.10-0110-06
4 Punch holes at a uniform distance of 40 mm and 6 mm in area (B) .
5 Punch 3 holes at a uniform distance of 40 mm and 6 mm in area (C) .
6 Grind section (2) down to bare metal on both sides in area of punched holes and in marked areas and coat with zinc dust paint.