Cab, cab mounting
Repair materials
Number | Designation | Order number |
BR00.45-Z-1002-02A | Adhesive Terokal 2444 | A 000 989 92 71 |
P60.80-2002-10
1 Remove stop plugs (1) from rear bolts in rear floor assembly.
P60.80-2003-10
2 Unscrew nuts (2) from rear bolts in rear cross member from below.
Installation: Replace body bearing bolts and nuts (2).
P60.80-2005-05
3 Pull floor covering (3) in interior stowage compartments toward front.
Only on model 463.245/248/249/323
333/341//346
Installation: Apply glue to underside of floor covering (3).
4 Remove covers (4) on left and right cable shafts.
Installation: Attach new adhesive tape to cable shaft cover (4).
P60.80-2006-04
5 Carefully remove cable holders (5).
Risk of breaking cable brackets (5) when removing and installing improperly; replace if necessary.
6 Lay wiring harness (6) down to side and remove cover (7).
Illustrated on model 463.248
P60.80-2007-11
7 Unscrew nuts (8) from bolts from below.
Use aid of helper to counterhold center body bearing bolts.
Installation: Replace body bearing bolts and nuts (8).
P60.80-2008-02
8 Remove air duct (9) in driver and passenger footwell.
P60.80-2009-02
9 Remove stop plugs (10) from front bolts .
P60.80-2010-11
10 Unscrew nuts (11) from front body bearing bolts .
Use aid of helper to counterhold front body bearing bolts.
Installation: Replace body bearing bolts and nuts (11).
11 Install in the reverse order.