ar5465s000101e

Remove/install sensors for Parktronic system (PTS) on the outside of the front bumper

유형 ar · 주제 54.65 · 버전 0102 · 2015-12-02

적용 대상: Model 447, 448 with code EZ7 (Active Parking Assist)

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 54 전기 장치, 장비 및 계기 › 54.65 주차보조장치 — 시리즈 447 · 시리즈 448

EinPAS 28 컴포트/운전자 지원 시스템 › 28.15 주차 어시스트 › 28.15.12 센서/스위치/배선 — 시리즈 447 · 시리즈 448

AR54.65-S-0001-01E

Remove/install sensors for Parktronic system (PTS) on the outside of the front bumper

Model

447, 448

with code EZ7 (Active Parking Assist)

Remove/install sensors for Parktronic system (PTS) on the outside of the front bumper
Remove/install sensors for Parktronic system (PTS) on the outside of the front bumper

Work procedure shown on left side of vehicle

1

Remove retaining clips (1) from left or right fender liner (2).


Installation: Check the retaining clips (1) for damage.


If damage is present

Replace respective retaining clip (1).


S54.65-4574-01

S54.65-4575-01

Remove/install sensors for Parktronic system (PTS) on the outside of the front bumper

2

Push fender liner to one side until outer left front PARKTRONIC sensor (B8/18) or outer right front PARKTRONIC sensor (B8/21) is accessible.



3

Disconnect electrical connection at PARKTRONIC sensor, outer left front (B8/18) or PARKTRONIC sensor, inner right front (B8/21).



4

Carefully pull catch hooks (arrows) outwards and pull PARKTRONIC sensor, outer left front (B8/18) or PARKTRONIC sensor, outer right front (B8/21) out of the guide.


Installation: Check the decoupling ring (3) for damage.
Convert decoupling ring (3) when replacing left front outer PARKTRONIC sensor (B8/18) or right front outer PARKTRONIC sensor (B8/21).


If decoupling ring (3) is damaged

Replace decoupling ring (3).



5

Install in the reverse order.


S54.65-4576-06