Removing and installing Parktronic system (PTS) warning display in instrument panel

AR54.65-P-0003RT

Removing and installing Parktronic system (PTS) warning display in instrument panel

25.2.05

 

Remove/Install

1

Switch off ignition and remove the transmitter key from the EIS [EZS] control unit

 On vehicles with Keyless Go, code 889: Press keyless go start/stop button repeatedly until ignition is switched off Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).

2

Lift the left air guiding nozzle (4a) or right air guiding nozzle (4b) on the vehicle center side at the plastic insert (3) using a long wedge slightly, unlatch left or right air conducting nozzle outwards (arrows) and remove upwards

 Installation: The lugs on the bottom sides of the air conducting nozzles must latch in the bores (5) on the plastic insert (3).

 Long wedge

*115589035900

3

Using a suitable tool, move into the bores (5), press the lugs (6) outwards and pull the plastic insert (3) upwards out of the instrument panel (1)

 Do not press the lugs outwards too hard otherwise they may break off.

4

Unlock and detach plug (2) at rear of the driver-side instrument panel PTS warning indicator (A44/1)

5

Unclip and remove the driver-side instrument panel PTS warning indicator (A44/1) from the plastic insert (3)

6

Install in the reverse order