Remove, install backup assist sensors in rear bumper

유형 ar · 주제 54.65 · 버전 0100 · 2002-11-29

적용 대상: MODELS 901.6, 902.6, 903.6, 904.6 with CODE (J44) Ultrasonic backup assist

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

AR54.65-D-0021A

10.9.02

MODELS 901.6, 902.6, 903.6, 904.6 with CODE (J44) Ultrasonic backup assist

D88.00-1105-06

1 Bumper

2 Clip

3 Electrical connector

4 Sensor for backup assist

 	Remove/install
1	Remove rear bumper (1)		AR88.20-D-2200A
2	Unplug electrical connector (3) from backup assist electrical connector (4)
3	Remove sensor from bumper	 Installation: Connector must point towards recess in bumper.
4	Install in the reverse order
5	Perform function check