AR54.65-D-0020A | Removing and installing backup assist control module | 10.9.02 |
MODELS 901.6, 902.6, 903.6, 904.6 with CODE (J44) Ultrasonic backup assist
D54.65-1118-01
1 Side wall lining
2 Electrical connector
3 Nut
4 Control module
| Remove/install | ||
1 | Remove cover at left rear column | ||
2 | Loosen side wall lining (1) partially using a plastic wedge. | ||
3 | Lift floor mat and bend side wall lining to the side | ||
4 | Unplug electrical connector (2) from control module (4) | ||
5 | Unscrew both nut s(3) and remove control module | ||
6 | Install in the reverse order | ||
7 | Perform function check |