P54.25-0214-06
Illustrated on model 210
1 Cover
3 Screw
4 Electrical connections
5 Screw
N7-1 Light module
| Removal, installation | ||
1 | Disconnect ground cable from battery | Insulate terminal on ground cable to prevent unintentional contact between disconnected ground cable and ground W10. | |
2 | Unhook control cable on release lever for parking brake and remove release lever guide | Installation: Clip release lever guide into mount on light module housing opposite direction of forward motion | |
3.1 | Remove bottom section of instrument panel (driver's side) | Model 208 | |
3.2 | Remove cover below instrument panel (driver's side) | Model 210 | |
4 | Unhook and disconnect electrical connections (4) on rear of light module (N7-1) | Installation: Complete electrical connections only after installing light module | |
5 | Unscrew screws (3, 5) | Installation: First screw in screw (3) in area of parking brake release lever. While screwing in support light module from below with hand and align on hole for second screw | |
6 | Remove light module (N7/1) from instrument panel | ||
| Assignments and lead connections for fuse blocks: | Model 208 | |
Model 210 | |||
7 | Reinstall in opposite order |