S54.15-4611-08
1 | Fuse and relay module | 4 | Electrical connectors | |
2 | Bolts | 5 | Electrical connectors | |
3 | Bracket |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
2 | Remove glove box | ||
3 | Disconnect electrical connectors (4) at fuse and relay module (1) | ||
4 | Remove screws (2) and take fuse and relay module (1) with holder (3) off crossmember until electrical connectors (5) are accessible | Installation: Ensure holder (3) is correctly seated at crossmember. | |
5 | Disconnect electrical connectors (5) and remove fuse and relay module (1) with holder (3) | ||
6 | Install in the reverse order |
참조 문서
- ah5400p000101a 정전기 방전으로 인한 전자 부품 손상 방지 지침
- ah6800n000101s 차량 승객실에서의 정비 작업 실행 지침
- ar6810s1400p