ar5410d0007sd

Remove/install additional battery

유형 ar · 주제 54.10 · 버전 0108 · 2012-02-22

적용 대상: MODEL 900, 906 with CODE (E28) 12 V 88 Ah additional battery

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 54 전기 장치, 장비 및 계기 › 54.10 배터리, 전원장치, 변압기 — 시리즈 900 · 시리즈 906

EinPAS 25 온보드 전기 시스템/네트워크/다기능 › 25.20 온보드 전기 시스템 › 25.20.20 배터리 — 시리즈 900 · 시리즈 906

AR54.10-D-0007SD

Remove/install additional battery

15.2.12

MODEL 900, 906 with CODE (E28) 12 V 88 Ah additional battery

Remove/install additional battery

D54.10-1169-08

Shown on engine 646

1 Ground cable

2 Positive line

3 Bracket

G1/2 Additional battery

4 Bracket

5 Vent line

Remove/install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Notes on battery

AH54.10-P-0001-01A

1

Disconnect ground line (1) from additional battery (G1/2)

2

Disconnect positive line (2) from additional battery (G1/2)

3

Detach vent line (5) from additional battery (G1/2)

4

Remove bracket (3, 4)

5

Remove additional battery (G1/2)

Installation: Observe disposal regulations when replacing additional battery (G1/2).

See:

Dispose of battery

OS54.10-P-0001-01Z

6

Install in the reverse order

참조 문서