ar4910p7000a

Removing and installing exhaust system complete

유형 ar · 주제 49.10 · 버전 0113 · 2006-01-10

적용 대상: ENGINE 112.921 in MODELS 210.063 /263 /081 /281 ENGINE 112.941 in MODELS 210.065 /082 /265 /282 ENGINE 113.940 in MODELS 210.070 /270 ENGINE 113.980 in MODELS 210.074 /274

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 49 배기가스 시스템, 배기가스 정화장치 › 49.10 배기관, 촉매변환장치, 사일렌서 — 시리즈 210 (모델 063, 065, 070, 074, 081, 082, 263, 265, 270, 274, 281, 282)

EinPAS 15 엔진 › 15.40 배기 시스템/배기가스 후처리 시스템 › 15.40.41 매니폴드/파이프/머플러/배기 호스 — 시리즈 210 (모델 063, 065, 070, 074, 081, 082, 263, 265, 270, 274, 281, 282)

엔진/변속기에도 적용: 112 921, 112 941, 113 940, 113 980

AR49.10-P-7000A

Removing and installing exhaust system complete

17.11.05

ENGINE 112.921 in MODELS 210.063 /263 /081 /281

ENGINE 112.941 in MODELS 210.065 /082 /265 /282

ENGINE 113.940 in MODELS 210.070 /270

ENGINE 113.980 in MODELS 210.074 /274

Removing and installing exhaust system complete

P49.10-0309-09

Illustrated on model 210.063

9/1 Rubber bushing

11/1 Bolts

11/2 Nuts

11/5 Bolt

11/6 Heat shield

G3/3 Left lambda sensor upstream of TWC

G3/4 Right oxygen sensor, before TWC

G3/3x1 Plug connection

G3/4x1 Plug connection

Removing and installing exhaust system complete

P49.10-0340-09

Illustrated on model 210.270

9/1 Rubber bushing

11/1 Bolts

11/2 Nuts

11/6 Heat shield

G3/3 Left lambda sensor upstream of TWC

G3/4 Right oxygen sensor, before TWC

G3/3x1 Plug connection

G3/4x1 Plug connection

Remove/install

On model 210.074074/274/, 274 with engine 113.980; note the larger shore hardness of rubber mounts (9/1)!

1

Disconnect plug connection for left and right O2 sensors upstream of TWC
(G3/3x1, G3/4x1)

AR14.00-P-5303A

2.1

Detach front axle torsion bar from longitudinal frame member and swivel torsion bar downwards

Models 210.063/263/065/265

Replace bolts.

*BA32.20-P-1001-02D

*BA32.20-P-1002-02D

3

Unscrew bolts (11/1) at flange connection between front exhaust system / exhaust manifold

If bolts are sluggish or thread is damaged:

Replace rivet nuts in exhaust manifold.

AR49.10-P-5531-01DA

*BA14.10-P-1002-01B

4

Unscrew nuts (11/2) on bracket

Replace nuts

5.1

Unbolt bolt (11/5) for suspension on downstream exhaust system

Models 210.063/065/070/074

5.2

Unhook rear exhaust system from rubber mount (9/1)

Models 210.265/263/270/282/274

Inspect rubber mount (9/1) for damage, replace if necessary.

6

Lift out exhaust system complete

Ensure that the heat shield (11/6) is not damaged when removing or installing the support.

7

Install in the reverse order

Install exhaust system free of stress.

Exhaust manifold

Number

Designation

Engine
112 except 112.951/
976

Engines 113.940/941/
942/943/944/
945/946/948/
960/961/962/
963/964/965/
966/967/968/
969/971/980/
981/982/984/
986/992/993/
995

BA14.10-P-1002-01B

Flange connection, exhaust manifold and front exhaust pipes

Nm

20

20

Front axle stabilizer bar

Number

Designation

Model 210 without level control /
ADS CODE 217a
except model 210.07
with code Z04, Z06 except model 210.08/28

Model 210 with level control /
ADS CODE 217a
except model 210.07
with code Z04, Z06
except model 210.08/28

BA32.20-P-1001-02D

Self-locking bolt, torsion bar to frame

Nm

20

20

BA32.20-P-1002-02D

Self-locking bolt, torsion bar
connecting rod to wishbone

Nm

80

80

참조 문서