AR47.20-A-1080LA | Remove/install fuel prefilter | 16.12.09 |
ENGINE 904.925 in MODEL 8AB390.053 /054
ENGINE 904.965 in MODEL 8AB390.053 /054
N07.57-0224-01
1 Threaded cap
2 Sealing ring
3 Filter element
4 Filter housing
| Removing | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Unscrew cap on fuel tank | In this way the fuel can flow out of the filter housing (4) back into the fuel tank. | |
2 | Clean outside of the fuel prefilter | ||
3 | Remove threaded cap (1) with filter insert (3) | Ensure that no foreign bodies enter the filter housing (4). On no account wipe out filter housing. | |
4 | Clean threaded cap (1) and filter insert (3) | Replace filter element (3) if severely soiled or damaged. | |
| Install | ||
5 | Inspect seal (2) and replace if necessary. | Lightly grease or oil new seal (2). | |
6 | Install threaded cap (1) with filter insert (3 | | |
7 | Screw cap onto fuel tank | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
8 | Start the engine and bleed the fuel system | Run the engine for approx. 1 minute. The fuel system is bled automatically. | |
9 | Inspect prefilter for leaks | Replace any damaged seals if necessary. | |
10 | Turn off engine |
Fuel filter
참조 문서
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험
- as4700z000101a 인화에 의한 폭발 위험, 연료의 흡입 및 음용에 의한 중독 위험, 연료의 피부 및 안구 접촉에 의한 상해 위험