Drag link
Number | Designation | Steering 765.866 | |
BA46.40-N-1001-04B | Nut, drag link to steering gear pitman arm | Nm | 285 |
Torque wrench
000 589 39 21 00
Commercially available tools
T46.40-0042-11
Remove
1 Loosen nut (1).
If necessary remove the cotter pin, if the nut (1) is secured with a cotter pin
2 Fit press-out tool (2) and pry drag link (4) off steering gear pitman arm (3).
3 Unscrew nut (1).
4 Detach drag link (4) from steering gear pitman arm (3).
Install
4 Install drag link (4) on steering gear pitman arm (3).
5 Screw on nut (1).
If a self-locking nut (1) is screwed on, it should be replaced.
5 Tighten nut (1) to the specified torque .
If the nut (1) is secured with the cotter pin, it should be replaced.