AR46.10-P-0300B | Removing and installing steering angle sensor | 24.10.94 |
MODEL 140.### ## up to 123446 with CODE (216b) Self-levelling suspension all-around, with adaptive damping system (ADS)
MODEL 129.### ## as of 079795,
140.### ## as of 123447 with CODE (216c) Adaptive damping system (ADS II) with electronic level control
MODEL 140, 210 with CODE (217a) Self-levelling suspension on rear axle with ADS
MODEL 129, 140, 202, 208, 170, 210 with CODE (472a) Electronic Stability Program (ESP)
P46.10-0227-01
P46.10-0226-01
| Removing, installing | ||
1 | Remove steering wheel | Model 140 up to end no. 123446 | |
Model 129 as of end no. 079795, model 140 as of end no. 123447, and models 202, 210 | |||
Models 170, 208 | |||
2 | Remove contact spiral (A45) together with the steering angle sensor (N49) | Model 129 as of end no. 079795, model 140 as of end no. 123447, and models 202, 210 | |
Models 170, 208 | |||
3 | Press steering angle sensor (N49) off contact spiral (A45) | The steering angle sensor is clipped onto the rear of the contact spiral. | |
4 | Install in the reverse order | ||
5.1 | Activate steering angle sensor | Vehicles with ADS or ESP |
참조 문서
- ar4610p0100a
- ar4610p0100b 스티어링 휠 탈, 장착
- ar4610p0100b
- ar4610p0100c 스티어링 휠 탈, 장착
- ar4610p0200a
- ar4610p0200b
- ar4610p030001a