S43.05-2000-11
1 Intermediate gear (Engine 601.970)
2 Joint
3 Vacuum pump
4 Screw
5 Vacuum line
| Removing and installing | ||
1 | Remove the air filter box | ||
2 | Remove the poly-V-belt | ||
3 | Remove the internediate gear (1) from the bracket support for the poly-V-belt | Engine 601.970 | |
4 | Remove the vacuum line (5) from the vacuum pump (3) | | |
5 | Remove the vacuum pump (3) | if necessary, rotate the engine with the crankshaft until the vacuum pump piston is slackened | |
if necessary, rotate the engine with the crankshaft until the vacuum pump piston is slackened | |||
Installation: clean the support areas (2) and replace the joint | |||
| |||
If the vacuum pump has been replaced due to the bearings seizing up, eliminate any metal remains! | |||
6 | Install in reverse order |
Vacuum pump