P42.20-2248-07
1 Brake disk
2 Rubber insert
3 Thumbwheel
4 Brake shoes
Modification notes
| Removing | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
| Notes on repairs to brake system | All models | |
1 | Release parking brake | ||
2 | Lift/jack up vehicle | ||
3 | Remove rear wheels | ||
Adjust | |||
4 | Remove rubber insert (2) | ||
5 | Bring brake shoes (4) into contact with parking brake drum | Turn the adjusting wheel (3) by means of a screw driver until the brake shoes (4) contact the brake drum and the brake disk (1) cannot be turned by hand anymore. | |
Positioning direction for applying the brake shoes (4): Turn both adjustment wheels from above downwards. | |||
6 | Detach adjustment wheel (3) | Loosen left and right adjustment wheel by the same number of teeth. It must be possible to rotate the rear wheel or brake disk (1) completely freely by hand. | |
| Checking | ||
7 | Operate the parking brake lever several times and check the travel of the parking brake lever | Number of notches at which the parking brake must be adjusted if up to that point there is insufficient braking effect | |
8 | Release parking brake and check unobstructed movement of rear wheels or brake disks | ||
| Install | ||
9 | Fit rear wheels | ||
Danger! | Risk of death caused by limbs being caught or crushed by rotating parts when performing tests on the brake test stand | Never leave the vehicle unattended on the rollers except in an emergency. Ensure that no one is under the vehicle or near rotating parts during testing. In case of emergency, use the EMERGENCY STOP switch to shut down test stand. | |
10 | Carry out brake test on the test stand |
Adjustment values for parking brake
참조 문서
- ah4200p000301a 브레이크 시스템 정비 지침
- ap4010p4050rt 휠 탈, 장착 및 필요시 교체
- ap4200p4290ba 브레이크 테스트
- ar0060p1000rt
- as0000z001001a 리프터에서 차량이 미끄러지거나 틸팅 시 생명의 위험
- as4200z000101a 브레이크 성능 시험대에서 테스트를 하는 동안 회전 중인 부품에 끼이거나 짓눌림으로 인한 생명의 위험