T41.10-0002-12
1 Propeller shaft
2 Rear axle
Modification notes
25.6.01 | Figure modified from 104 Nm to 105...130 Nm | Value in BA41.10-N-1001-01E on model 671 with rear axle 748.12 and transmission 714.120/140 | |
25.6.01 | Figure modified from 104 Nm to 105...130 Nm | Value in BA41.10-N-1003-01E on model 671 with rear axle 748.12 and transmission 714.120/140 |
| Remove/install | ||
| Notes on self-locking nuts and bolts | All models | |
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of lifting platform and position the four support plates below support points specified by vehicle manufacturer. | |
1 | Position the wheel gripper under the wheels | ||
2 | Raise vehicle evenly | ||
3 | Secure vehicle at the inner vehicle jack contact points at the front and rear with jack stands | As the wheel grippers at the rear axle (2) have to be removed, the vehicle must be secured adequately by further jack stands at the usual jack support points otherwise the stability is not guaranteed. | |
Danger! | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | Keep all body parts and limbs away from moving mechanical components. | |
4 | Detach propeller shaft (1) at the rear axle (2) and at the transmission | Secure the propeller shaft (1) to prevent it from falling down. When removing, do not pull the propeller shaft (1) apart. If the sliding piece has to be separated from the propeller shaft (1) before removal the position of the sliding piece is to be marked relative to the propeller shaft (1). | |
Model 671 with rear axle 748 and transmission 714, 721 | |||
Model 671 with rear axle 748 and transmission 714, 721 | |||
| |||
5 | Remove propeller shaft (1) | Remove the propeller shaft (1) with the help of a second person. | |
6 | Install in the reverse order |
Propeller shaft
Number | Designation | Model 671 with | |
BA41.10-N-1001-01E | Nut, propeller shaft flange to rear axle (without spring washers) | Nm | 105...130 |
BA41.10-N-1003-01E | Bolt, propeller shaft to transmission output flange | Nm | 105...130 |
Commercially available tools
Workshop equipment
WE58.40-Z-1005-05A | Wheel gripper |
참조 문서
- ah0000n000101a 자가 잠금식 볼트와 너트 관련 지침
- as0000z000901a 끼임 또는 짓눌림에 의한 상해 위험 또는 극단적인 경우 기계 장치에 손발이 절단되는 상해 위험
- as0000z001001a 리프터에서 차량이 미끄러지거나 틸팅 시 생명의 위험