AR40.30-P-0401B | Preparations for distance and comparison measurements | 1.3.99 |
MODEL 170, 202, 208, 210
P40.30-2034-01
P40.30-2036-01
P40.30-2035-01
Model 170
07n Threaded bolts
63 Engine suspension
64 Fixing rail
"k" Rearmost tapped holes in engine suspension
Models 202, 208 with engines 112, 113
07n Threaded bolts
63 Engine suspension
64 Fixing rail
"k" Rearmost tapped holes in engine suspension
Models 202, 208 with engine 111
07n Threaded bolts
63 Engine suspension
64 Fixing rail
"k" Rearmost tapped holes in fixing rail
P40.20-2049-01
P40.30-2033-01
P40.30-2027-01
Model 210 except 210.08/28 shown with model 611
07n Threaded bolts
63 Engine suspension
64 Fixing rail
"k" Rearmost tapped holes in fixing rail or engine suspension
07 Suspension
07r Left support
07s Right support
024b Retaining pin with spirit level
"K" Reference point (off-center)
Model 210.08/28
07n Threaded bolts
63 Engine suspension
64 Fixing rail
"k" Rearmost tapped holes in engine suspension
P40.30-2028-11
06 Telescopic measuring rod
07r Left support
07s Right support
07n Threaded bolts
024 Measuring tip
024b Retaining pin with spirit level
Checking | |||
1 | Align vehicle horizontal in the longitudinal direction by loading with suitable weights | Measurement of inclination via door entrance edges, e.g. carry out with a spirit level. | |
2 | Screw in threaded bolts (07n) | Insert threaded bolts in the rearmost tapped holes "k" in fixing rail. Depending on the model, unscrew rear bolts from engine suspension or remove plugs for tapped holes. | |
3 | Insert suspension (07) horizontal and adjust supports (07r, 07s) to suit the respective model | The suspension (07) does not have to be at right angles to the longitudinal axis of the vehicle, but may be inclined to it (depending on the position of the rearmost tapped holes in the fixing rail (64)) | |
| |||
4 | Install telescopic measuring rod (06) with connecting parts on retaining pin (024b) | Insert respective measuring tips/pins (024) for the corresponding distance or comparative measurement | |
Connecting parts | |||
Telescopic measuring rod | |||
Telescopic measuring rod | |||
Measuring fixture set | |||
5 | Carry out distance and comparative measurement at front and rear axle | Models 170, 202, 208 | |
Model 210 |
124 589 02 19 00
140 589 09 63 00
170 589 00 63 00
124 589 01 19 00
Telescopic measuring rod
Telescopic measuring rod
Suspension
Measuring fixture set
124 589 08 63 00
Connecting parts
참조 문서
- ar4030p040101a 간격측정과 비교측정을 위한 마운트를 각각의 모델에 알맞게 조정
- ar4030p0402a
- ar4030p0402c