Test values for front wheel alignment
Number | Designation | Model 667 with front axle 730.4/6 | Model 668 with VA 730.6 front axle | Model 670 with front axle 730.6/7 | |
BE40.20-N-1002-11D | Wheel camber | ° | 1° (20') | 1° (20') | 1° (20') |
Test values for front wheel alignment
L40.20-0047-01
1 Insert wheel alignment equipment (1) with bolt (4) into projector bracket (9).
2 Position measuring instrument horizontal relative to longitudinal axis of vehicle using spirit level and tighten thumb screw.
3 Turn knob "Camber" until the bubble level for camber measurement is at center.
Measuring
4 Read off value from scale for camber measurement at camber measuring point.
5 Perform camber measurement on other wheel of front axle in same way.
The dial for camber measurement is divided into the measuring ranges "Camber plus" and "Camber minus". The measuring range "Camber plus" ranges from 0° to +8° . The measuring range "Camber minus" ranges from 0° to -4° . One graduation line on the dial corresponds to 10'.