Workshop equipment
WE58.40-Z-1001-15A | Chassis measuring instrument |
L40.20-0016-02
Use projector bracket with claw mounts, otherwise mounting on the rim flange is not possible.
1 Lock support arms and clamping arms to rim diameter plus 2 inches (set to same scale value on all three sides).
2 Unscrew bolt of clamping arm as far as necessary.
3 Connect projector bracket to the bottom of the rim with both support arms and press the claws between the rim flange and tire.
L40.20-0017-02
5 Press clamping arm with claw at top between rim flange and tire. Tighten the projector tensioner by screwing in the bolt on the clamping arm.
6 Check projector bracket for tight seating.