Represented on axle 634.081
1 | Positioning the projectors (5) on the projector bracket (4) of the 1st front axle |
The vehicle should be in a straight steering line and supported with the front wheels on turntables. |
2 | Support two measuring stands (2) on the left and right of the 1st rear axle and align them perpendicularly to the vehicle |
3 | Direct the LH projector's light beam (5) to the scale of the LH measuring trestle (2) |
Write down the indicated value |
4 | Direct the RH projector's light beam (5) to the scale of the RH measuring trestle (2) |
Again, write down the indicated value |
5 | Turn the steering wheel until both scales of the measurement stands (2) indicate the same values (mean value) |
For example, in this case, the mean value is: 26. |
Vehicles with two front shafts with steering: | |
| |
The straight-line position test on the 2nd front axle should be run in the same manner as with the 1st front axle. |
B40.20-0011-03