Test values for wheels, tires
Number | Designation | Model | Model 613 | Model 671 | ||
BE40.10-N-1001-01D | Radial runout at tire | 22.5̋ | mm | < 1,5 | < 1,8 | < 1,8 |
W40.10-0006-01
1 Jack up vehicle at the front axle and secure with stands.
On model 613 the vehicle must not be raised at the middle longitudinal member otherwise serious damage to the frame can occur.
2 Set dial gauge (8) so that the measurement disc (43) is at the same height as the axle center.
3 Place measurement disc (43) as near as possible to tire center and turn wheel by hand.
The deflection of the measuring needle indicates the radial runout. One graduation line is equivalent to 1 mm.
4 Compare indicated value with specified value.
If the specified value is exceeded, rotate the tire on the rim (match) and repeat the measurement. If the specified value continues to be exceeded, check the wheel centering and replace the tire or the wheel if necessary.