Replace tires

AR40.10-D-1030FA

Replace tires

06.02.2019

Model

909

43a

Balance weight

43g

Valve

X

Distance

Y

Distance

Topical note

Information on tires / rims

AH40.10-P-9411-01A

Topical note

General information on rim / tire conversions

AH40.10-P-1050-01A



Remove

1

Remove respective wheel and tire assembly

AR40.10-D-1100F

2

Remove valve element from valve (43g)

3

Remove wheel balance weights (43a)

 Assembly tool

*124589176300

4

Position bead breaker shovel of tire mounting device opposite valve (43g) on tire bead



000 588 00 83 00 Tire mounting device

WS40.00-P-0006B


Do not position on the tire side wall, but on the bead flank only.
The carcass can otherwise be damaged.

5

Pry off tire on inside and outside and over the safety bead seat of the disk wheel

6

Clamp disk wheel on tire mounting device

7

Moisten rim flange and tire bead with soapy water

8

Align mounting head at small distances (X, Y) to disk wheel

9

Position disk wheel at mounting head of tire mounting device

 Position disk wheel in direction of rotation so that the valve (43g) is located approx. 10 cm in front of the mounting head.

10

Remove tire

 To do so, pry the tire bead over the assembly lug using an assembly lever.

11

Remove valve (43g)

 Dispose of valve (43g).



Check

12

Check condition of disk wheel

AR40.10-P-1010-01A



Install

13

Install new valve (43g)

 Install a new valve (43g) without valve element.

14

Moisten rim flange and tire bead with soapy water

15

Align mounting head at small distances (X, Y) to disk wheel

16

Place tire at angle onto disk wheel, and draw on over the rim flange using tire mounting device

 Observe the running direction on tires with specified running direction. Put as little stress as possible on bead area.

17

Align light spots for tire and disk wheel with each other

18

Remove disk wheel with tire from tire mounting device

19

Inflate tire

 Inflate tire without valve element to a maximum of 3 bar. The tire must slide evenly over the safety bead seat of the disk wheel.

If necessary



Coat the tire beads with soapy water again.

20

Turn valve element into valve (43g)

21

Correct tire pressure to specified value



Tire pressure table

AP40.15-D-4060-01F

22

Balance complete wheel

AR40.10-D-1040FA

23

Install complete wheel

AR40.10-D-1100F