Shift collar, interaxle/inter-wheel differential lock
Número | Denominação | Axles 733.011, 733.038, 733.041 | |||
BE33.40-B-1002-01A | Clearance between the teeth of the coupling sleeve and jaw coupler for the adjustment of the press switch | mm | 0,5 | ||
Interwheel differential lock
Número | Denominação | Rear axles 743.104/106/132, 743.143/149/153 | Rear axles 745.520/525/590 | |||
BE35.40-B-1002-02A | Clearance between the teeth of the engagement bushing and the clamp coupling for the adjustment of the pressure switch | mm | 0.5 | 0.5 | ||
B35.40-0006-01
Regulate the switch as follows:
Apply compressed air (1) to the pneumatic connection and make the coupling sleeve teeth to be on top with the gripper coupling (not engaged).
Put a 0.5mm (2) feeler between the coupling sleeve teeth and the gripper coupling teeth
Turn on a test device (3) or test lamp at the pressure switch terminals.
Screw the switch until the test device sends a signal or the test lamp turns on.
Tighten the switch counter-nut.