1 | Rear axle gear |
2 | Screw |
S35.31-4528-11
3 | Seal |
S35.31-4529-11
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
| Remove/install | ||
1 | Remove propeller shaft. |
| |
Model 470, 471 with engine 642 | |||
2 | Drain transmission oil from rear axle differential (1). | ||
3 | Remove rear axle shafts. | ||
4 | Support rear axle differential (1) and secure with tensioning strap. | ||
| 000 588 10 62 00 Support plate | ||
| 000 588 11 62 00 Major assembly mount | ||
Commercially available devices/tools | |||
5 | Remove bolts (2) . | 14 screws (2) are installed. | |
Bolt, rear axle differential to rear axle | |||
6 | Remove rear axle differential (1). | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
7 | Remove seal (3). | Installation: Replace seal (3). | |
| Clean | ||
8 | Clean sealing surfaces. | Assembly cleaner | |
9 | Install in the reverse order. | ||
| Check | ||
10 | Check rear axle differential(1) for proper operation and leak tightness. | ||
Notes on evaluating leakages |
참조 문서
- ah0000n001101a 누출 평가 지침
- ar3530s0620p
- ar3531s0523p
- ar4110s0050p
- ar4110s0050pu
- as0000z001001a 리프터에서 차량이 미끄러지거나 틸팅 시 생명의 위험
- as0000z001701a 모서리가 날카로운 차량 부품에서 절단상과 찰과상으로 인한 상해 위험
- as0040z000101a 변속기 오일 취급 시 피부와 눈의 상해 위험 변속기 오일 흡입으로 인한 건강 위험
- ws0100p0092b
- ws2600p3309b