Drive pinion
Number | Designation | Rear axles | |
BA35.30-N-1001-06C | Slotted nut, coupling flange to drive pinion | Nm | 1000 |
400 589 01 07 00
Wrench socket
Ratio wrench
000 589 69 63 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1059-02A | Loctite 262 | Henkel Loctite Deutschland GmbH |
T35.30-0085-01
1 Slide joint flange onto drive pinion.
2 Install washer.
3 Screw on slotted nut.
If no locking plate is fitted, the slotted nut is provided with locking agent before screwing on.
4 Install clamping fork, centering disk and wrench socket.
5 Tighten slotted nut to the tightening torque .
While tightening the drive pinion crank it several times in both directions and release the load on the bearing with light blows with a plastic hammer.
6 Install new locking plate.
If the slotted nut is secured with a locking plate.