Remove/install pinion housing with drive pinion · ar3530t0469b · Mercedes-Benz WIS

AR35.30-T-0469B

Remove/install pinion housing with drive pinion

16.10.09

REAR AXLE 745.990 /996 /997 in MODEL 613

T35.30-0013-01

1 Pinion housing

2 Rear axle housing

	Removing
1	Remove ring gear with differential		AR35.30-T-0464B
2	Detach pinion housing (1) with drive pinion gear from rear axle housing (2)
	Install
3	Coat sealing surfaces of pinion housing (1), rear axle housing (2) and shims with sealant		*BR00.45-Z-1012-01A
4	Install pinion housing (1) with drive pinion gear on rear axle housing (2)	 - Pay attention to the guide pins when mounting the pinion housing (1). - Observe markings of ring gear and drive gear (so that the same pairs of teeth are engaged with each other again).
			*BA35.30-N-1007-03H
5	Install crown wheel with differential		AR35.30-T-0464B

Differential assembly with differential

Number	Designation			Rear axle 745.990 with ring gear  368	Rear axle 745.996 with ring gear  485


BA35.30-N-1007-03H	Serrated bolt of pinion housing to axle housing	M12x1.5	Nm	175	175

Differential assembly with differential

Number	Designation			Rear axle 745.997 with ring gear  410


BA35.30-N-1007-03H	Serrated bolt of pinion housing to axle housing	M12x1.5	Nm	175

Repair materials

Number	Designation	Order number
BR00.45-Z-1012-01A	Omnifit FD 3041 sealing compound	A 002 989 47 20 10