AR35.30-T-0465BA | Disassemble, assemble differential | 12.8.04 |
Rear axle 746.217 in MODEL NMB613.358 /388
T35.31-0032-11
1 Crown wheel
2 Differential cage
3 Pin
4 Differential bevel gear
5 Washer
6 Differential side gear
7 Pin
8 Thrust washer
T35.31-0033-11
2 Differential cage
3 Pin
4 Differential bevel gear
7 Pin
T35.31-0034-11
1 Crown wheel
6 Differential side gear
| Disassemble/assemble | ||
Danger! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and undeburred vehicle parts. Deburr replacement panels. | |
1 | Remove ring gear (1) with differential | ||
2 | Detach ring gear (1) from differential cage | ||
3 | Remove bolt (3) | Push the bolt (3) outwards carefully using a suitable tool. | |
4 | Remove bolt (7) | Push the bolt (7) carefully out of the guide using a suitable drift. | |
5 | Remove differential bevel gears (4) | ||
6 | Remove spherical washers (5) | ||
7 | Remove differential side gear (6) from differential cage (2) | Remove the differential side gear (6) carefully using a suitable tool. | |
8 | Remove pressure plate (8) from the differential cage (2) | ||
9 | Detach differential side gear (6) from ring gear (1) | Remove the differential side gear (6) carefully using a suitable tool. | |
10 | Detach pressure plate (8) from ring gear (1) | ||
11 | Check parts which have been removed for wear | Worn parts should be replaced. | |
12 | Assembly takes place in the reverse order | ||
13 | Install ring gear (1) with differential |
참조 문서
- ar3530t0464ba
- ar3530t430004ba
- as0000z001701a 모서리가 날카로운 차량 부품에서 절단상과 찰과상으로 인한 상해 위험