Crown wheel and pinion with differential
Number | Designation | Model 613.364/365 | ||
BA35.30-N-1003-03I | Slotted nut, coupling flange to drive pinion | Nm | 1200 | |
717 589 00 31 00
Retainer wrench
Ratio wrench
000 589 78 63 00
T35.30-0046-01
1 Place bolts in propeller shaft flange.
2 Press guard plate (4) onto the propeller shaft flange up to the stop.
3 Place propeller shaft flange, washer and slotted nut on drive pinion gear shaft.
4 Fit retainer wrench (1) to propeller shaft flange.
5 Fit ratio wrench (2) with slotted nut bit (3) on slotted nut of propeller shaft flange.
6 Tighten slotted nut to specified tightening torque .
7 Remove retainer wrench (1) from propeller shaft flange.
8 Secure slotted nut with locking plate.