ar3530d430004ru
Remove/install ring gear on differential housing
유형 ar · 주제 35.30 · 버전 0201 · 2016-10-17
적용 대상: Rear axle 741.408 in model 909 with code A71 (Differential lock rear axle)
“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.
위치
기능 그룹 2 섀시 › 35 뒷차축 › 35.30 구동장치, 구동축 — 시리즈 909
EinPAS 17 드라이브 트레인/액슬 › 17.51 뒤차축 › 17.51.65 뒤차축 기어/액슬 드라이브 샤프트 — 시리즈 909
엔진/변속기에도 적용: 741 408
AR35.30-D-4300-04RU
| Remove/install ring gear on differential housing
|
|
|
Rear axle
| 741.408 in model 909
|
|
| with code A71 (Differential lock rear axle)
|
Number
| Designation
|
|
|
| Rear axle 741.40 (except 741.408)
Rear axle 741.408 in model 903.61/66/67, 909
Rear axle 741.43
|
BA35.30-N-1001-02A
| Ring gear to differential housing
| M121
| 12.9
| Nm
| 180
|
|
|
| M141.5
|
| Nm
| –
|
1
| Remove screws/bolts (10) of ring gear (8).
|
2
| Hammer down ring gear (8) on the circumference of the differential case (9) using a soft hammer.
|
|
| Check entire gear set and replace if necessary.
|
3
| Heat up ring gear (8) to approx. 60 °C.
|
4
| Mount ring gear (8) on differential case (9), tighten new screws/bolts (10) .
|
|
| Always replace screws/bolts (10).
|
