ar3510s2490s

Remove/install front rear axle center assembly mount

유형 ar · 주제 35.10 · 버전 0203 · 2012-03-27

적용 대상: MODEL 636 MODEL 639 except CODE (MA0) E-CELL 60 kW

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 35 뒷차축 › 35.10 뒷차축 전체 — 시리즈 636 · 시리즈 639

EinPAS 17 드라이브 트레인/액슬 › 17.51 뒤차축 › 17.51.65 뒤차축 기어/액슬 드라이브 샤프트 — 시리즈 636 · 시리즈 639

AR35.10-S-2490S

Remove/install front rear axle center assembly mount

13.3.12

MODEL 636

MODEL 639 except CODE (MA0) E-CELL 60 kW

Remove/install front rear axle center assembly mount

N35.31-2009-11

1 Differential

2 Bolts

3 Bolts

4 Front rear axle center assembly mount

5 Rubber bushing

 	Remove/install
1	Raise vehicle with vehicle lift		AR00.60-S-1000S
2	Support rear axle differential (1)	Transmission jack gotis://H_00.10_01.0
		Transmission platform gotis://A_25/35/49_02.0
3	Unscrew bolts (2, 3) and remove front rear axle differential mount (4)		*BA35.10-N-1002-03M
			*BA35.10-N-1001-03M
4	Remove vibration damper from front rear-axle differential mounting (4)	Only when replacing front rear-axle differential mounting (4).	AR35.10-S-0045S
	Check
5	Check rubber mount (5) for wear and damage	 If rubber mount (5) damaged, replace front rear-axle differential mounting (4).
6	Install in the reverse order

 Rear axle

Number	Designation			Model 636, model 639 without engine 642	Model 639 with engine 642


BA35.10-N-1001-03M	Bolt, front suspension of rear axle center assembly to rear axle center assembly	Stage 1	Nm	50	50
		Stage 2	°	90	90
BA35.10-N-1002-03M	Bolt, front suspension of rear axle center assembly to body		Nm	25	25

참조 문서