ar3330p066002a

Driving out and pressing on outer joint

유형 ar · 주제 33.30 · 버전 0102 · 1999-09-22

적용 대상: MODEL 210.08 /28

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 33 앞차축 › 33.30 구동장치, 차동기어, 구동축 — 시리즈 210 (모델 08*, 28*)

EinPAS 17 드라이브 트레인/액슬 › 17.50 앞차축 › 17.50.51 액슬 샤프트/드라이브 샤프트 — 시리즈 210 (모델 08*, 28*)

AR33.30-P-0660-02A

Driving out and pressing on outer joint

Driving out and pressing on outer joint

P33.30-0253-01

Driving out

1 Drive out outer joint ring (60l) using 27 mm open-end wrench.

First version illustrated

Driving out and pressing on outer joint

P33.30-0254-01

Pressing on

2 Check circlip (60f) and replace if necessary.

3 Push disk spring (60g) and intermediate ring (60h) onto front axle shaft.

4 Press on outer joint ring (60l), the circlip (60f) must lock in position in the joint hub.

First version illustrated