ar3320d145202a

Detaching wishbone from steering knuckle and front axle beam

유형 ar · 주제 33.20 · 버전 0105 · 2001-08-09

적용 대상: FRONT AXLE 730.408 /410 in MODEL 901, 902 FRONT AXLE 730.409 in MODEL 902 FRONT AXLE 730.409 /413 in MODEL 903 FRONT AXLE 730.411 /414 in MODEL 904 FRONT AXLE 732.2 in MODEL 690.6

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 33 앞차축 › 33.20 휠가이드, 허브 — 시리즈 690 (모델 6**) · 시리즈 901 · 시리즈 902 · 시리즈 903 · 시리즈 904

EinPAS 17 드라이브 트레인/액슬 › 17.50 앞차축 › 17.50.41 컨트롤 암/핸들바/스태빌라이저 — 시리즈 690 (모델 6**) · 시리즈 901 · 시리즈 902 · 시리즈 903 · 시리즈 904

엔진/변속기에도 적용: 730 408, 730 409, 730 410, 730 411, 730 413, 730 414, 732 2**

AR33.20-D-1452-02A

Detaching wishbone from steering knuckle and front axle beam

Detaching wishbone from steering knuckle and front axle beam

730 589 02 33 00

Puller

Detaching wishbone from steering knuckle and front axle beam

D33.20-0021-01

1 Unscrew nut (13) on wishbone joint.

2 Press steering knuckle (10) off wishbone using puller.

Detaching wishbone from steering knuckle and front axle beam

D33.20-0020-01

3 Unscrew stop plate (7) from wishbone (12).

On versions with anti-roll bar, pull the stop plate hanging on the anti-roll bar upwards and leave hanging.

Detaching wishbone from steering knuckle and front axle beam
Detaching wishbone from steering knuckle and front axle beam

D33.20-0004-01

D33.20-0002-01

4 Undo rear screw joint on wishbone by unscrewing wishbone bolt (2).

5 Undo front screw joint on wishbone by unscrewing wishbone bolt (2).

6 Remove wishbone (12).