ar3235s2050e

Remove/install front stabilizer bar

유형 ar · 주제 32.35 · 버전 0107 · 2019-03-04

적용 대상: Model 447 with engine 651 except code ZG2 (Permanent all-wheel drive) Model 447 with engine 654.9 except code ZG2 (Permanent all-wheel drive) Model 447, 448 with engine 274

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 32 서스펜션 › 32.35 스태빌라이저 — 시리즈 447 · 시리즈 448 · 시리즈 651 · 시리즈 654 (모델 9**)

EinPAS 17 드라이브 트레인/액슬 › 17.50 앞차축 › 17.50.41 컨트롤 암/핸들바/스태빌라이저 — 시리즈 447 · 시리즈 448 · 시리즈 651 · 시리즈 654 (모델 9**)

엔진/변속기에도 적용: 274 ***

AR32.35-S-2050E

Remove/install front stabilizer bar

15.02.2019

Model	447 with engine 651
	except code ZG2 (Permanent all-wheel drive)
Model	447 with engine 654.9
	except code ZG2 (Permanent all-wheel drive)
Model	447, 448 with engine 274

Remove/install front stabilizer bar

Shown with ENGINE 651

1	Stabilizer bar
2	Bolts

S32.35-4516-06

Remove/install front stabilizer bar

Shown with engine 651 with code MX0 (Blue Efficiency package)

4	Retaining frame
5	Bolts

S32.35-4520-01

	Notes on repair work on suspension components		AH00.00-P-0100-01A
 	Remove/install
1	Remove right cover from jack support point.	MODEL 447 with MOTOR 651 with CODE MX0 (BlueEFFICIENCY package)	AR61.30-S-1001-04E
2	Remove lower engine compartment paneling.		AR61.20-S-1105E
3	Remove the underfloor paneling on the right.	Model 447 with motor 651 with code MX0 (BlueEFFICIENCY package)	AR61.30-S-1001-01E
4	Remove bolts (5) and remove retaining frame (4) from right underfloor paneling.	MODEL 447 with MOTOR 651 with CODE MX0 (BlueEFFICIENCY package)
5	Remove both torsion bar linkages from stabilizer bar (1).		AR32.35-S-3328E
		 Do not completely remove the stabilizer bar torsion bar linkage (1).
6	Remove bolts (2) and remove stabilizer bar (1).	 Bolt, stabilizer bar to integral carrier	*BA32.35-N-1001-02K
7	Install in the reverse order

 Front axle torsion bar

Number	Designation		Model 447, 448
BA32.35-N-1001-02K	Bolt, stabilizer bar to integral carrier	Nm	60

참조 문서