ar3220d0240h

Remove/install rubber mount of rear axle spring

유형 ar · 주제 32.20 · 버전 0107 · 2011-12-13

적용 대상: MODEL 906.11 /21 /61 /71 with REAR AXLE 741.412 /415 MODEL 906.13 /23 /63 /73 with REAR AXLE 741.412 /415 except CODE (PL9) Air suspension, VB-Airsuspension company MODEL 906.15 /25 /65 with REAR AXLE 741.413 /414 /416 /420 except CODE (PL9) Air suspension, VB-Airsuspension company MODEL 900.63 with REAR AXLE 741.412 MODEL 900.65 with REAR AXLE 741.413 /414 /420 MODEL 8AC906.133 /631 /633 /635 with REAR AXLE 741.428 with CODE (ZL3) National version for Latin America MODEL 8AC906.153 /155 /655 /657

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 32 서스펜션 › 32.20 스틸 서스펜션, 토션 바, 자동 차고조절장치 — 시리즈 900 (모델 63*, 65*) · 시리즈 906 (모델 11*, 13*, 133, 15*, 153, 155, 21*, 23*, 25*, 61*, 63*, 631, 633, 635, 65*, 655, 657, 71*, 73*)

EinPAS 20 섀시 › 20.16 서스펜션 › 20.16.30 스프링/에어 벨로우즈/쇽업소버/스프링 스트럿 — 시리즈 900 (모델 63*, 65*) · 시리즈 906 (모델 11*, 13*, 133, 15*, 153, 155, 21*, 23*, 25*, 61*, 63*, 631, 633, 635, 65*, 655, 657, 71*, 73*)

엔진/변속기에도 적용: 741 412, 741 413, 741 414, 741 415, 741 416, 741 420, 741 428, 741 429

AR32.20-D-0240H

Remove/install rubber mount of rear axle spring

7.12.11

MODEL 906.11 /21 /61 /71 with REAR AXLE 741.412 /415

MODEL 906.13 /23 /63 /73 with REAR AXLE 741.412 /415 except CODE (PL9) Air suspension, VB-Airsuspension company

MODEL 906.15 /25 /65 with REAR AXLE 741.413 /414 /416 /420 except CODE (PL9) Air suspension, VB-Airsuspension company

MODEL 900.63 with REAR AXLE 741.412

MODEL 900.65 with REAR AXLE 741.413 /414 /420

MODEL 8AC906.133 /631 /633 /635 with REAR AXLE 741.428 with CODE (ZL3) National version for Latin America

MODEL 8AC906.153 /155 /655 /657 with REAR AXLE 741.429 with CODE (ZL3) National version for Latin America

Remove/install rubber mount of rear axle spring

D32.20-1107-06

1 Rear spring

2 Front rubber mount

3 Rear rubber mount

4 Spring shackle

5 Rubber mount of spring shackle

Removing

Danger!

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; shield off hazard area if necessary.
Inspect special tools for damage and proper operation (visual inspection).
Wear protective gloves.

AS00.00-Z-0001-01A

1

Remove rear spring (1)

AR32.20-D-0230H

Disassemble/assemble

2

Use a suitable drift to press front rubber bushing (2) and rear rubber bushing (3) out of rear spring (1)

Assembly: Coat the new front rubber mount (2) and rear rubber mount (3) with lubricant paste. Press the front rubber mount (2) and rear rubber mount (3) centrally into the spring eyes of the rear spring (1).

Workshop press

gotis://G_58.2_01.0

Lubricant paste

*BR00.45-Z-1002-06A

3

Use a suitable drift to press rubber mount of spring shackle (5) out of spring shackle (4)

Assembly: Coat the new rubber mount of the spring shackle (5) with lubricant paste. Press the rubber mount of the spring shackle (5) centrally into the spring shackle (4).

Workshop press

gotis://G_58.2_01.0

Lubricant paste

*BR00.45-Z-1002-06A

4

Assemble in the reverse order

Install

5

Install rear spring (1)

AR32.20-D-0230H

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Antifriction paste, rubber parts 2.5 kg, DB supply specification 6867.00

A 000 989 01 60

참조 문서