W31.30-0043-11
represented in type 950.5
1 Chassis measuring device
2 Measuring tip
3 Suspended ruler
| Tips on chassis faults and their causes | ||
1 | Preparing the vehicle for measurement | ||
2 | Print the chassis measurement form | Record the measured values achieved on the following work steps on the form. | |
3 | Install the measuring devices (1) on the vehicle chassis | ||
4 | Measure the lateral deformation of the vehicle chassis | Using a chassis measuring jig | |
If the lateral deformation is out of tolerance: | |||
Correct the lateral deformation of the vehicle chassis. | |||
5 | Measure the vehicle chassis curvature and distortion | Using a chassis measuring jig | |
If the distortion is out of tolerance: | |||
Correct the lateral deformation of the vehicle chassis. | |||
6 | Measure the diagonal displacement of the vehicle chassis | ||
If the diagonal displacement of the vehicle chassis is out of tolerance, replace the chassis. |
Test values for vehicle frame