ar3022d115201c

Detaching and attaching idle speed control (ISC) actuator at intermediate flange

유형 ar · 주제 30.22 · 버전 0102 · 2000-02-08

적용 대상: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 30 제어, 정속주행장치 › 30.22 공회전 조절장치 (LLR) — 시리즈 901 (모델 0**) · 시리즈 902 (모델 0**) · 시리즈 903 (모델 0**) · 시리즈 904 (모델 0**)

EinPAS 15 엔진 › 15.45 엔진 매니지먼트 › 15.45.31 액추에이터/액추에이팅 부품/혼합 컨트롤러 — 시리즈 901 (모델 0**) · 시리즈 902 (모델 0**) · 시리즈 903 (모델 0**) · 시리즈 904 (모델 0**)

엔진/변속기에도 적용: 111 979

AR30.22-D-1152-01C

Detaching and attaching idle speed control (ISC) actuator at intermediate flange

Idle speed control (ISC))

Number

Designation

Engine 111.979/
984

BA30.22-N-1001-01A

Idle speed control (ISC) actuator at intermediate flange

Nm

10

Detaching and attaching idle speed control (ISC) actuator at intermediate flange

D30.22-1002-01

1 Detach connecting rod (2) at throttle valve lever.

Installation: After attaching the connecting rod (2) the throttle valve lever must be positioned against the microswitch (arrow).

2 Detach restoring spring (3) at throttle valve lever.

3 Take off vacuum line (1) at idle speed control actuator.

Detaching and attaching idle speed control (ISC) actuator at intermediate flange

D30.22-1003-01

4 Unscrew hexagon socket bolts (4) and place idle speed control actuator (5) to the side with electrical connection.

Installation: Pay attention to tightening torque.

5 Install in the reverse order.