ar3012p1321gr

Remove/install accelerator pedal

유형 ar · 주제 30.12 · 버전 0105 · 2006-10-11

적용 대상: ENGINE 112.945 in MODEL 463.244 /245 /250 ENGINE 113.962 in MODEL 463.247 /248 /249 /254 ENGINE 113.982 in MODEL 463.243 /246 ENGINE 612.965 in MODEL 463.322 /323 ENGINE 628.962 in MODEL 463.309 /332 /333 ENGINE 113.993 in MODEL 463.270 /271 ENGINE 642.970 in MODEL 463.303 /340 /341

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 30 제어, 정속주행장치 › 30.12 제어 - 섀시측 — 시리즈 463 (모델 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271, 303, 309, 322, 323, 332, 333, 340, 341) · 시리즈 628 (모델 962)

EinPAS 15 엔진 › 15.45 엔진 매니지먼트 › 15.45.35 엔진 컨트롤 — 시리즈 463 (모델 243, 244, 245, 246, 247, 248, 249, 250, 254, 270, 271, 303, 309, 322, 323, 332, 333, 340, 341) · 시리즈 628 (모델 962)

엔진/변속기에도 적용: 112 945, 113 962, 113 982, 113 993, 612 965, 642 970

AR30.12-P-1321GR

Remove/install accelerator pedal

25.6.01

ENGINE 112.945 in MODEL 463.244 /245 /250

ENGINE 113.962 in MODEL 463.247 /248 /249 /254

ENGINE 113.982 in MODEL 463.243 /246

ENGINE 612.965 in MODEL 463.322 /323

ENGINE 628.962 in MODEL 463.309 /332 /333

ENGINE 113.993 in MODEL 463.270 /271

ENGINE 642.970 in MODEL 463.303 /340 /341

Remove/install accelerator pedal

P30.12-2009-08

24/3 Spreading clip

3 Recess

4 Cam

1 Accelerator pedal

2 Accelerator pedal lever

Remove/Install

1

Pull out the spreading clip (24/3) backwards

2

Detach bottom end of accelerator pedal (1)

3

Turn the accelerator pedal (1) at the accelerator pedal lever (2) to the left

Turn until the recess (3) in the accelerator pedal (1) is over the cam (4) on the accelerator pedal rod (2).

4

Remove accelerator pedal (1)

For this, detach the accelerator pedal (1) from the accelerator pedal lever (2).

5

Install in the reverse order