ar3010p1010fa

Adjusting accelerator control

유형 ar · 주제 30.10 · 버전 0109 · 2010-03-12

적용 대상: ENGINE 120.982 /983, 606.964

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 30 제어, 정속주행장치 › 30.10 기계적 제어

EinPAS 15 엔진 › 15.45 엔진 매니지먼트 › 15.45.35 엔진 컨트롤

엔진/변속기에도 적용: 120 982, 120 983, 606 964

AR30.10-P-1010FA

Adjusting accelerator control

10.3.10

ENGINE 120.982 /983, 606.964

Adjusting accelerator control

P30.10-0227-05

6 Accelerator control relay lever

24 Accelerator pedal

29 Adjusting nut

30 Bowden cable

32 Adjusting bolt

a Closed throttle stop

b Wide open throttle stop

B37 Pedal position sensor

S16/7 Kickdown switch

Adjusting accelerator control

P30.10-0268-05

Engine 606.964

6 Accelerator control relay lever

24 Accelerator pedal

29 Adjusting nut

30 Bowden cable

32 Adjusting bolt

a Closed throttle stop

b Wide open throttle stop

B37 Pedal position sensor

S16/7 Kickdown switch

Adjusting

Adjusting closed throttle

1

Check closed throttle stop

Accelerator control relay lever (6) must be touching closed throttle stop (a) of the pedal position sensor (B37). Alter, if necessary, with adjusting bolt (32).

Adjusting wide open throttle

2

With engine switched off, depress accelerator pedal (24) from inside car as far as stop at kickdown switch (S16/7)
(do not operate kickdown switch!)

Accelerator control relay lever (6)
must be touching wide open throttle stop (b) of pedal position sensor (B37); alter, if necessary with adjusting nut (29)

3

Lubricate bowden cable (30) between end pieces and guide piece with anti-corrosion grease

*BR00.45-Z-1006-06A

Repair materials

Number

Designation

Order number

BR00.45-Z-1006-06A

Anti-corrosion grease 40 g / DB supply specification 6834.00

A 001 989 37 51 10