D30.10-0006-01
1 Place a 3 mm thick washer (arrow) between accelerator pedal (1) and WOT stop (2). Press accelerator pedal to "WOT position".
D30.10-0007-01
2 Release clip in mount at accelerator pedal (1) and pull into WOT position (arrow). Lock the moving detent tongues in this position.
Do not overtension throttle control.
D30.10-0008-01
3 Release pressure again on the accelerator pedal (1) and move idle speed nut (3) at bowden cable against the stop.
D30.10-0009-01
4 Remove washer. Once again depress accelerator pedal (1) fully and check WOT position. Play between accelerator pedal and WOT stop (2) 3 1 mm.
Repeat setting if necessary.