ar2910p4597rt

Remove/install brake pedal

유형 ar · 주제 29.10 · 버전 0101 · 2009-06-17

적용 대상: MODEL 251

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 29 페달장치 › 29.10 페달, 베어링 블록 — 시리즈 251

EinPAS 21 브레이크/진공압 시스템/압축 공기 시스템 › 21.15 주 브레이크/진공압 시스템 › 21.15.20 브레이크 페달 — 시리즈 251

AR29.10-P-4597RT

Remove/install brake pedal

15.6.09

MODEL 251

Remove/install brake pedal

P29.10-2108-09

1 Brake pedal

3 Pin

4 Securing clamp

5 Nuts

Remove/install

Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

In order to avoid damage, do not pull, twist or press the brake booster pushrod to one side using force when the brake pedal (1) is removed

1

Remove the safety clip (4) carefully and press out or pull out the pin (3) (arrow A)

Installation: Lightly grease the bolt (3) and insert into the installation position shown.

Long-life grease

*BR00.45-Z-1001-06A

2

Unscrew nuts (5) and detach the brake pedal (1) from the firewall

Do not damage the rubber boot!

If the brake pedal (1) or components of the brake pedal mount are damaged, then the brake pedal (1) should be replaced as a complete unit (with bearing bracket).

Installation: Ensure rubber boot is correctly seated.

*BA43.10-P-1001-01H

3

Install in the reverse order

Brake booster

Number

Designation

Model 251

BA43.10-P-1001-01H

Nut, brake booster carrier to front end

Nm

25

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-06A

Long-life grease

A 000 989 63 51 11

참조 문서