B29.10-0035-09
1 Fixating support of brake pedal
2 Screws with flange
3 Fixing support of the pedal valve
4 Screws with flange
5 Brake pedal
6 Support lining
7 Return spring
8 Jamb
9 Articulation axle
10 flat washer
11 Activation rod counter pin
12 Spacer washer
13 Pedal articulation counter pin
14 Activation rod articulation axle
15 Activation rod fork
16 Flange nut
17 Activation rod
18 Pedal valve
19 Brake light switch
20 Washers with flange
B Brake pedal course measured in a 360 mm radius from center of articulation axle
| Remove | ||
1 | Place vehicle on a flat and leveled place and shim rear wheels to avoid it from moving accidentally | ||
2 | Disconnect negative battery cable or turn off main switch | ||
3 | Remove steering column to facilitate access to pedal set | ||
4 | Disconnect wires from brake light switch | Be careful with the poliamide piping and its connections. | |
5 | Disconnect pneumatic piping from the pedal valve | Be careful not to let dirt in the pneumatic connexions. | |
6 | Remove screws (2) from fixation support of the brake pedal (1) | ||
7 | Carefully remove complete brake pedal set | The set of the brake pedal will be assembled with supports (1, 3) and the pedal valve (18). | |
| Install | ||
8 | Place the set in place and fixate with the support (1) with the 4 screws (2) on main support | | |
| |||
9 | Connect the electrical cables to the brake pedal switch (21) | ||
10 | The brake pedal, totally assembled and adjusted, must present a course represented by measure "B" | Pedal "B" course measured in a 360 mm radius from center of articulation axle (9). | |
11 | Install steering column cover | ||
12 | Verify if everything is in place, connect negative battery cable or turn on main switch | ||
13 | Charge pneumatic system and perform a test run |
Pedals, bearing bracket
Número | Denominação | Vehicles 979.046 | |||
BE29.10-B-1001-01D | Length A of the auxiliary spring | mm | 63,5 | ||
BE29.10-B-1003-01D | Clutch pedal stroke B | Z519.201/16 | mm | - | |
Z519.201/55 | mm | 167,4...175,4 | |||
Z519.201/18 | mm | 143...148 | |||
Pedals, bearing bracket