ar2750s060101e
Remove grooved ball bearing in rear transmission housing
유형 ar · 주제 27.50 · 버전 0200 · 2016-04-30
적용 대상: Model 447 with engine 651 with transmission 722.9 Model 447, 448 with engine 274 with transmission 722.9
“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.
위치
기능 그룹 2 섀시 › 27 자동변속기 › 27.50 휠세트 — 시리즈 447 · 시리즈 448 · 시리즈 651
EinPAS 17 드라이브 트레인/액슬 › 17.20 변속기 › 17.20.30 하우징/커버/오일 팬/마운트 — 시리즈 447 · 시리즈 448 · 시리즈 651
엔진/변속기에도 적용: 274 ***, 722 9**
AR27.50-S-0601-01E
| Remove grooved ball bearing in rear transmission housing
|
|
|
Model
| 447 with engine 651 with transmission 722.9
|
Model
| 447, 448 with engine 274 with transmission 722.9
|
06.04.2016
| Retaining ring pliers commercially available tool added
| Operation step 1
|
|
1
| Remove the grooved ball bearing retaining ring.
|
|
| Commercially available devices/tools
Circlip pliers
|
2
| Screw collet into puller and tighten.
|
3
| Attach puller over the bearing inner race.
|
4
| Clamp collet (picture A).
|
|
| To do so, turn the upper part of the puller counterclockwise (arrow).
|
5
| Remove the grooved ball bearing from the transmission housing (picture B).
|
