AR26.60-D-6600A | Remove/install shift lever | 10.11.09 |
TRANSMISSION 711.603 in MODELS 901.3, 902.3, 903.3, 904.3
TRANSMISSION 711.612 in MODEL 901.0 /4, 902.0 /4, 903.0 /4, 904.0 /4
TRANSMISSION 711.613 in MODELS 667, 668, 670
D26.60-0001-08
Shown on model 901.0/4, 902.0/4, 903.0/4, 904.0/4
| Remove/install | ||
1 | Pull up boot (1) on shift lever (4). | ||
2 | Unscrew hexagon bolt (2) together with washer (3). | Gearshift lever to transmission | |
| Bolt for gearshift lever modified | Remove dacrometized flange cap bolts and replace with hexagon bolt with washer. | |
3 | Pull gearshift lever (4) upward and off. | Use puller if gearshift lever is attached firmly. Do not apply blows with a hammer to release the gearshift lever from the tapered seat under any circumstance as this may damage the bearing at the lower part of the shift lever (plastic bush). | |
Puller | |||
Installation: grease cone | |||
MB high-temperature antifriction bearing grease | |||
4 | Install in the reverse order |
Shift mechanism
Number | Designation | Trans-mission 711.603 | Trans-mission 711.612 | Trans-mission 711.613 | ||
BA26.60-N-1001-01A | Bolt of shift lever to transmission | Nm | 63 | 58 | 63 | |
Puller
001 589 38 33 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1016-06A | MB high-temperature antifriction bearing grease | A 001 989 23 51 10 |